For sign shops

Layered SVG for sign shops

The vinyl preset is selected. Set the real sign width, read the cut check, and download SVG or DXF. The logo never leaves this browser.

Image converter

Drop a PNG, JPG, or WebP

You can also paste an image, or pick a file.

Nothing is uploaded. The picture stays on this device. There is no account, and the SVG you download is not watermarked.

Maker preset

Three colors and clean edges, so each color is one piece to weed.

Drops islands smaller than this many pixels on a side. 0 keeps every speck.

Clears the color that dominates the edge, including a near-white edge. Spots of that color inside the design are cleared too.

Stacked sheets offsets each layer in the preview only. The download stays assembled, in paint order.

Your layered preview shows up here. Hide a layer to leave it out of the download.

Height follows the picture. SVG, DXF, and PDF use this width.

SVG keeps the curves and sets its width and height from the finished size. DXF polylines use that same width in millimetres, with curves flattened and Y flipped upright. PDF is one page at that size. The zip is one SVG per visible layer. Design Space, LightBurn, and xTool usually honor the size. If one ignores it, set the width again there.

A Pro plan is planned for people who want unlimited layered files. It is not for sale, and there is no price yet. What that means

A plotter file, not a poster

A shop logo usually arrives as a PNG. The plotter needs closed paths, one color at a time. This page reduces the picture to a few flat colors and names each group, for example Layer 1 - #1C4E8A. Hide a color you will not weed, then download.

Type the finished width before you export. An 18 inch logo should say 18 in, not whatever pixel size the PNG happened to be. SVG, DXF, and PDF all use that width. If your software ignores the SVG size, type it again there. The DXF guide covers millimetres and holes.

What the cut check is for

Tiny islands become dots the blade tries to cut and you try to weed. After the trace, each layer lists anchor points and how many pieces are under the preset size. Remove specks raises the cleanup and traces again. Smooth does the same for curves. Neither button invents a time from your plotter. A high point count is only a warning that the job may run slowly.

Stacked sheets in the preview offsets the layers so you can count colors. The file you download is still assembled. For a laser job in the same shop, switch to the laser page or the converter presets.

Why Layered SVG

It stays on this device

The picture is not uploaded. There is no account. The SVG you download is not watermarked.

You set the real width

Type the finished width in inches or millimetres. SVG, DXF, and PDF use that size.

A cut check, not a guess

Each layer reports tiny pieces and anchor points. Remove specks and Smooth run the trace again.

See the stack

Preview the layers assembled or offset like cardstock. The download stays assembled, with Cricut-style names.

Open the converter. Related: free layered designs, split an SVG by color.

Questions

Does this replace a sign program?

No. It turns a picture into colored paths and writes SVG or DXF at the width you type. You still pick vinyl, blade, and the plotter settings in your own software.

How small a piece will it flag?

The vinyl preset flags pieces under about 1.5 mm at the finished width. Cardstock uses about 1 mm. That is a weed and cut check, not a guarantee the material will hold.

Is the file watermarked?

No. There is no account, and the download is the same art as the preview.