Cricut Design Space

PNG to SVG for Cricut

Design Space cuts paths, not pixels. This converter turns a PNG, JPG, or WebP into an SVG with one named group per color, and the Cricut cut preset is already selected.

Image converter

Drop a PNG, JPG, or WebP

You can also paste an image, or pick a file.

Nothing is uploaded. The picture stays in this browser tab.

Maker preset

Four flat colors, tight corners, and small specks removed. Each color is its own cut layer.

Drops islands smaller than this many pixels on a side. 0 keeps every speck.

Clears the color that dominates the edge, including a near-white edge. Spots of that color inside the design are cleared too.

Your layered preview shows up here. Hide a layer to leave it out of the download.

SVG keeps the curves. DXF writes polylines in millimetres at 96 pixels per inch, with curves flattened and Y flipped upright. PDF is one page, 1 pixel = 1 point. The zip is one SVG file per visible layer.

A Pro plan is planned for people who want unlimited layered files. It is not for sale, and there is no price yet. What that means

What you are actually uploading

A PNG is a grid. Design Space can print that grid on a print then cut sheet, but a blade has no line to follow until the grid becomes paths. The file this page builds is an SVG. Each color is a group. The group id looks like Layer 1 - #1C4E8A, which is the string Design Space can list in the layers panel. Layer 1 is painted first, so it is the back color. Later layers sit in front of it.

Start from artwork that is already simple. A logo, a sticker, a flat illustration, or a high contrast drawing traces into something you can weed. A photo of a mug, a soft gradient, or a drop shadow does not. The converter reduces the picture to a handful of flat colors. It does not invent the missing edges in a blurry photo, and it should not be asked to.

Cut, or print then cut

Use the Cricut cut preset when every color is a separate material: vinyl, iron-on, or cardstock. It aims at about four colors, keeps corners fairly tight, and turns background removal on, because a white margin around a logo is usually not a piece you want to weed. Switch to the print then cut preset when the picture itself should be printed and only a contour should be cut. That preset keeps more colors, leaves the background in the file, and smooths the curves.

Print then cut still has to be set up inside Design Space. This SVG does not contain Cricut registration marks. Design Space prints those when the project type is print then cut. If you bring in a busy eight-color SVG and then try to cut every color as vinyl, you have chosen the wrong preset. Change it before you download.

How many colors to ask for

The slider runs from 2 to 8. That number is a target. Two colors is a simple design: a shape and a background, or a shape and a hole. Four is a practical multi-color vinyl job, one mat color at a time. Six or eight belongs on a print, or in the hands of someone who enjoys a long weeding session. If two colors in the original are close, they can land on the same layer. That merge is the point of the reducer. If a color you need disappears, move the slider up, turn the speckle filter down, and convert again.

Look at the preview with one layer hidden at a time. A layer that is only a fringe of anti-aliased pixels along an edge is not a cut you want. Hide it and download. The file matches the layers that are still shown.

Background, specks, and smoothing

Background removal samples the outer edge, finds the color that shows up most, and clears pixels close to it. On a white or near-white edge it also clears the dirty off-white that JPEG compression leaves behind. It clears that color inside the design as well, so the counter of a letter O does not stay as a white sticker. If the design is supposed to include the edge color, turn the option off. White lettering on a transparent field is the usual case for leaving it off, or for drawing the letters in a color that is not the edge.

Specks are tiny islands. A blade will try to cut them, and you will spend the evening lifting dots. Speckle size is measured in pixels along a side. A setting of 4 drops islands under about 16 pixels. Raise it when the preview looks dusty. Lower it when thin serifs, small stars, or the dot of an i disappear. Smoothing is the other control that ruins type. Low smoothing keeps a polygon, which is what block letters and geometric logos want. High smoothing fits curves, which is kinder to script and also able to melt a tight counter or a one-pixel stroke. If a letter fills in, move smoothing down before you blame the font.

Size after import

Pictures larger than 1200 pixels on the long side are scaled down before the trace. A 4000 pixel export from a phone does not become a 4000 pixel path, and a cut file is better when it does not. The SVG width and height are in pixels. Design Space maps that to a size of its own when you upload. Do not trust the imported size for a finished decal. Select the design, type the width you want, and leave the lock on so the height follows. If a circle came out as an oval, the source image was already stretched. Fix the source. The tracer will not unstretch it.

In Design Space

Upload the SVG, then open the layers panel and confirm one layer per color you meant to keep. Weld shapes of the same color that should cut as a single piece. Attach layers that should stay stacked and move as a group. Do not flatten while you still need separate cut colors. Flatten collapses everything into one print image. Contour is the right tool for a speck the filter missed. If a hole is filled with a color you did not want, it is often a white counter that background removal did not see because removal was off. Turn it on, or hide that layer here and download again.

A few limits, stated so you do not discover them on the mat. This page will not offset a path for the thickness of a blade. It will not pick a mat, a material, or a pressure. It will not repair a design you do not have the rights to cut. The trace runs in the page, in a WebAssembly build of VTracer, and the PNG is not uploaded.

Related: the Cricut overview, how a layered SVG is put together, and when you want DXF instead.

Questions

Does Design Space cut a PNG?

Design Space can print a PNG. It cannot follow a PNG with a blade. The PNG has to become paths first. This page builds those paths and puts each color in its own SVG group.

Where do the layer names show up?

After you upload the SVG, open the layers panel. Each color is a group named like Layer 1 - #E23B2A. Layer 1 is the back color. If a group is missing, it was hidden in the preview before download, or the color was merged.

Does this add Cricut print then cut registration marks?

No. Design Space prints its own registration marks when you set a project to print then cut. The SVG from this page is the artwork only.

The letters filled in. What do I change?

Lower smoothing so the trace stays polygonal, and lower the speckle size so small counters are not deleted. If the letters are thinner than a few pixels after the 1200 pixel scale-down, redraw them heavier and convert again.

Can I weld layers in Design Space?

Yes. Weld colors that should cut as one piece. Attach layers that should stay stacked and move together. Do not flatten if you still need separate colors. Flatten is for a single print.