A file Design Space can separate
Cricut Design Space will print a PNG and it will cut an SVG. If you upload the PNG and expect a blade to follow the artwork, you get a rectangle or a print, not a weedable design. Convert first. The SVG from this page has one group per color. The group name includes the hex color, so the layers panel is readable after import: Layer 1 is the back color, and each later layer is another material or another printed tone.
Vinyl and iron-on want few colors. Four is a full Saturday. Cardstock layering wants the same kind of file: each color is a sheet, and you cut them one after another. Print then cut wants the opposite emphasis. Keep more of the original colors, leave the background if it is part of the print, and let Design Space handle registration. Switch presets in the tool above before you download. The print then cut preset does not draw Cricut's corner marks. Those are added by Design Space when the project is set to print then cut.
After the upload
Check the size. The SVG is in pixels, and Design Space picks an inch size that is rarely the decal you measured. Type the width you want. Weld paths of one color that should cut as a single piece. Attach layers that must stay aligned. Leave Flatten alone unless you have decided the job is a print. Contour deletes a stray island you do not want to weed. If the stray island is everywhere, go back, raise the speckle size, and export again. Fixing a hundred dots by hand is slower than another trace.
Thin type is the usual failure. The image is reduced so the long side is at most 1200 pixels, then small specks are dropped. A hairline font does not survive that. Use a heavier weight, or lower smoothing and speckle size and look at the counters before you cut. The PNG to SVG for Cricut guide walks through the same choices in more detail. If the shop next door asked for DXF instead, that is a different machine. Use the DXF export and do not expect Design Space to be the program that opens it.
What you still decide
Mat, material, and pressure are not in the file. A vinyl setting on cardstock is a torn sheet, and no SVG prevents that. You also need the right to cut the artwork. The converter does not check licenses, and it does not upload the image to be checked. It runs in the browser.